Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerken voor Dante Mazzanti

Bewerking goedgekeurd door Dante Mazzanti

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Insert a plastic opening tool into the groove between the rear glass and the midframe.
[*
black] Pull up on the suction cuprear glass panel while holding the phone down with the plastic opening toolmidframe to separate the rear panelcomponents.
[* icon_note] If you encounter too much resistance
from the body ofadhesive, slide the phoneopening pick under the glass a few more times.
[* black] Insert a plastic opening tool into the groove between the rear glass and the midframe.
[*
black] Pull up on the suction cuprear glass panel while holding the phone down with the plastic opening toolmidframe to separate the rear panelcomponents.
[* icon_note] If you encounter too much resistance
from the body ofadhesive, slide the phoneopening pick under the glass a few more times.