Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Adam O'Camb

Bewerking goedgekeurd door Adam O'Camb

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] AttachOnce the rear glass is hot to the touch, apply a suctionsuction cup near the bottom edge of the glass.
[* black] Lift on the suction
cup to create a small gap underneath the lower halfrear glass, and insert an opening pick into the gap.
[* icon_note] Optionally, once the pick is inserted, you can add a few drops
of isopropyl alcohol into the rear glass panelgap to help weaken the adhesive in the following steps.
[* black] AttachOnce the rear glass is hot to the touch, apply a suctionsuction cup near the bottom edge of the glass.
[* black] Lift on the suction
cup to create a small gap underneath the lower halfrear glass, and insert an opening pick into the gap.
[* icon_note] Optionally, once the pick is inserted, you can add a few drops
of isopropyl alcohol into the rear glass panelgap to help weaken the adhesive in the following steps.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Oude versie

Nieuwe versie