Skip to main content

Wijzigingen aan stap #11

Bewerking door Ben Eisenman

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* black] Remove the two tiny screws that hold the metal screw plate that is attached attached to the on/off switch
[* black] Grasp the metal screw plate attached to the on/off switch and lift slightly up and away from the rear panel. The button should come with the cable.
[* black] Gently peel up the on/off switch ribbon cable. Be sure to pull near where the ribbon cable is glued to the rear panel.