Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #12

Bewerking door Andrew Optimus Goldheart

Bewerking goedgekeurd door Andrew Optimus Goldheart

Voor
Na
Ongewijzigd

Stap regels

[* icon_note] Removing the battery before lifting out the logic board is not strictly required, but makes removing the logic board easier and safer. If you leave your battery in, be especially careful not to bend the logic board against the battery's case near its bar code.
[* black] Remove the following Tri-WingTri-point screws securing the battery to the upper case:
[* red] One 5.5 mm Tri-WingTri-point screw
[* orange] One 13.5 mm Tri-WingTri-point screw
[* black] Remove the following Tri-WingTri-point screws securing the battery to the upper case:
[* red] One 5.5 mm Tri-WingTri-point screw
[* orange] One 13.5 mm Tri-WingTri-point screw
[* black] Lift the battery out of the upper case.