Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #12

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* icon_note] Removing the battery before lifting out the logic board is not strictly required, but makes removing the logic board easier and safer. If you leave your battery in, be especially careful not to bend the logic board against the battery's case near its bar code.
[* black] Remove the following Tri-Wing screws securing the battery to the upper case:
[* red] One 5.5 mm Tri-Wing screw
[* orange] One 13.5 mm Tri-Wing screw
[* black] Lift the battery out of the upper case.