Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #4

Bewerking door Miroslav Djuric

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Insert a small iPod opening tool into the seam on the holdHold button side of the Nanonano, with the edge of the tool pointing toward the rear panel.
[* icon_note] The large iPod opening tool is no longer needed to gain access to the left side of the iPod.
[* black] Gently enlarge the existing gap by pressing/wiggling the small iPod opening tool into the gap near each of the the two tabs attached to the rear case, pushing the clips toward the center of the Nano until both have been freed.
[* black] Insert a small iPod opening tool into the seam on the holdHold button side of the Nanonano, with the edge of the tool pointing toward the rear panel.
[* icon_note] The large iPod opening tool is no longer needed to gain access to the left side of the iPod.
[* black] Gently enlarge the existing gap by pressing/wiggling the small iPod opening tool into the gap near each of the the two tabs attached to the rear case, pushing the clips toward the center of the Nano until both have been freed.