Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerking door Walter Galan

Wachtend op goedkeuring


Stap regels

+[* black] Insert a small iPod opening tool into the seam on the hold button side of the Nano, with the edge of the tool pointing toward the rear panel.
+[* icon_note] The large iPod opening tool is no longer needed to gain access to the left side of the iPod.
+[* black] Gently enlarge the existing gap by pressing/wiggling the small iPod opening tool into the gap near each of the the two tabs attached to the rear case, pushing the clips toward the center of the Nano until both have been freed.

Afbeelding 1

Geen vorige afbeelding