Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door Rachel Nicole

Bewerking goedgekeurd door Rachel Nicole

Voor
Na
Ongewijzigd

Stap regels

[* black] Remove 2the two bronze screws from smallthe metal casing usingplate with a medium phillips screwdriver
[* yellow] 1/2 inch bronze screws (2)
Phillips head screwdriver.
[* black] Carefully lift the metal caseplate up to expose the motherboard.
[* icon_caution] Caution: There is a wire strip running through the metal plate that is soldered to motherboard and power supply board, thusboard. The plate cannot be completely removed. Do NOT force plate upwards. With the Japanese Mega CD (though this may also be applicable to machines from other regions), allAll the ribbon cables can be safely unplugged by simply pulling them out of their slot.
[* black] Remove 2the two bronze screws from smallthe metal casing usingplate with a medium phillips screwdriver
[* yellow] 1/2 inch bronze screws (2)
Phillips head screwdriver.
[* black] Carefully lift the metal caseplate up to expose the motherboard.
[* icon_caution] Caution: There is a wire strip running through the metal plate that is soldered to motherboard and power supply board, thusboard. The plate cannot be completely removed. Do NOT force plate upwards. With the Japanese Mega CD (though this may also be applicable to machines from other regions), allAll the ribbon cables can be safely unplugged by simply pulling them out of their slot.