Ga door naar hoofdinhoud

Wijzigingen aan stap #5

Bewerking door Tobias Isakeit

Bewerking goedgekeurd door Tobias Isakeit

Voor
Na
Ongewijzigd

Stap regels

-[* black] For the next connector, which is right next to the previous wire, there is a piece of tape that is sealing it to the board. Remove this first.
+[* black] For the next connector, which is right next to the previous wire, there is a piece of tape attached to a metal bar.
+[* black] Flip the metal bar over using the tape as a handle.
[* black] Next, grab onto the connector and slowly pull it from the socket in the logic board.