Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerken voor Andrew Optimus Goldheart

Bewerking goedgekeurd door Andrew Optimus Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] The following steps detail repairing an NFC antennaa Force Touch sensor with separated layers. If you're replacing your NFC antennaForce Touch sensor with a new part, ignore these steps.
[* black] The following steps detail repairing an NFC antennaa Force Touch sensor with separated layers. If you're replacing your NFC antennaForce Touch sensor with a new part, ignore these steps.
[* icon_note] The remaining adhesive sticker backing makes a great work surface.
[* icon_note] Open the gap between the two layers, but do not peel apart any more of the original adhesive.
[* black] Apply super-glue to the lower half of the antennasensor and press the upper half down into the glue. Press hard to squeeze out any excess glue and make the antennasensor as thin as possible.
[* black] Apply super-glue to the lower half of the antennasensor and press the upper half down into the glue. Press hard to squeeze out any excess glue and make the antennasensor as thin as possible.