Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerken voor Andrew Optimus Goldheart

Bewerking goedgekeurd door Andrew Optimus Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] The following steps detail repairing an NFC antenna with separated layers. If you're replacing your NFC antenna with a new part, ignore these steps.
[* icon_note] The remaining adhesive sticker backing makes a great work surface.
[* icon_note] Open the gap between the two layers, but do not peel apart any more of the original adhesive.
[* black] Apply super-glue to the lower half of the antenna and press the upper half down into the glue. Press hard to squeeze out any excess glue and make the antenna as thin as possible.