Ga door naar hoofdinhoud

Wijzigingen in stap #5

Bewerken voor Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Use tweezers to peel up any adhesive left behind on the lower case. Also remove any adhesive that stuck to the Force Touch sensor.
[* black] Clean all traces of adhesive (and broken glass, if any) thoroughly from the case before re-sealing your watch. Scour the case using the pointtip of aan opening tool or spudger wrapped in a lint-free cloth or coffee filter, along with a little isopropyl alcohol (90% concentration or greater).
[* black] Clean all traces of adhesive (and broken glass, if any) thoroughly from the case before re-sealing your watch. Scour the case using the pointtip of aan opening tool or spudger wrapped in a lint-free cloth or coffee filter, along with a little isopropyl alcohol (90% concentration or greater).
[* icon_caution] Don't rush this step. Even a small amount of residue can prevent your display from bonding to the case, causing it to come loose over time.