Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

Wijzigingen aan stap #5

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Use tweezers to peel up any adhesive left behind on the lower case. Also remove any adhesive that stuck to the Force Touch sensor.
[* black] You may want to use an alcohol-soaked q-tip to clean any residue offClean all traces of adhesive (and broken glass, if any) thoroughly from the case. Be surecase before re-sealing your watch. Scour the case using the point of a spudger wrapped in a lint-free cloth or coffee filter, along with a little isopropyl alcohol (90% concentration or greater).
[* icon_caution] Don't rush this step. Even a small amount of residue can prevent your display from bonding
to letthe case, causing it dry before proceedingto come loose over time.
[* black] You may want to use an alcohol-soaked q-tip to clean any residue offClean all traces of adhesive (and broken glass, if any) thoroughly from the case. Be surecase before re-sealing your watch. Scour the case using the point of a spudger wrapped in a lint-free cloth or coffee filter, along with a little isopropyl alcohol (90% concentration or greater).
[* icon_caution] Don't rush this step. Even a small amount of residue can prevent your display from bonding
to letthe case, causing it dry before proceedingto come loose over time.

Afbeelding 2

Oude versie

Nieuwe versie