Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Sam Goldheart

Bewerking goedgekeurd door Sam Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Remove the single triwing screw securing the NFC antenna connector cable.
[* black] As the screw is on the vertical wall of the inside of the case, you may want to use a driver extension to make your driver a little thinner and get a better angle on the screw.
[* icon_note] This screw is very small and strips easily, take care to operate at a proper angle and push as you turn.