Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Jacob Abrego

Bewerking goedgekeurd door Jacob Abrego

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Place the camera backward. (The LCD screen side should be facing up)
[*
red] Remove the four 3.2 mm Philip'sPhillips screws with a #00 Phillips screwdriver.
[* icon_note] Note: The screws are
located on the backside of the camera around the edges connecting the lens to the casing.
[* icon_note] Be careful when removing the screws to not strip them by applying enough pressure and rotating in the proper direction.

[* icon_cautionblue] Do not remove the top right Philip'sPhillip's screw because the lens'lens gears may fall out.
[* black] Place the camera backward. (The LCD screen side should be facing up)
[*
red] Remove the four 3.2 mm Philip'sPhillips screws with a #00 Phillips screwdriver.
[* icon_note] Note: The screws are
located on the backside of the camera around the edges connecting the lens to the casing.
[* icon_note] Be careful when removing the screws to not strip them by applying enough pressure and rotating in the proper direction.

[* icon_cautionblue] Do not remove the top right Philip'sPhillip's screw because the lens'lens gears may fall out.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie