Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #4

Bewerking door Samantha Taylor

Bewerking goedgekeurd door Samantha Taylor

Voor
Na
Ongewijzigd

Stap regels

[* black] Locate the two ribbons connected to the camera and the LCD screen. One is shown here located in red. The other is shown in the previous step located in blue.
[* black] Remove the top left ribbon, locatedribbon (located in blue in Step 8, first8) by gripping the connector and sliding it straight out.
[* black] Second, remove the bottom ribbon, locatedribbon (located in red in,in) by gripping the connector and sliding it straight out.
[* black] Remove the top left ribbon, locatedribbon (located in blue in Step 8, first8) by gripping the connector and sliding it straight out.
[* black] Second, remove the bottom ribbon, locatedribbon (located in red in,in) by gripping the connector and sliding it straight out.
[* icon_note] Tweezers may be necessary to grip the connectors. Pay close attention to how the ribbons are disconnected as this will help in replacing the screen later.
[* black] '''NOTE''': When reassembling, use tweezers to reconnect small ZIF (Zero Insertion Force) on top of screen.
[* black] '''NOTE''': When reassembling, use tweezers to reconnect small ZIF (Zero Insertion Force) on top of screen.