Ga door naar hoofdinhoud

Wijzigingen in stap #4

Bewerken voor Jacob

Bewerking goedgekeurd door Jacob

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Locate the two ribbons connected to the camera and the LCD screen. One is shown here located in red. Thered the other is shown in the previous step located in blueorange.
[* blackred] Remove the top left ribbon (located in blue in Step 8) by gripping the connector and sliding it straight out.
[* black] Second, removeorange] Remove the bottomside ribbon (located in red in) by gripping the connector and sliding it straight out.
[* black] Locate the two ribbons connected to the camera and the LCD screen. One is shown here located in red. Thered the other is shown in the previous step located in blueorange.
[* blackred] Remove the top left ribbon (located in blue in Step 8) by gripping the connector and sliding it straight out.
[* black] Second, removeorange] Remove the bottomside ribbon (located in red in) by gripping the connector and sliding it straight out.
[* icon_note] Tweezers may be necessary to grip the connectors. Pay close attention to how the ribbons are disconnected as this will help in replacing the screen later.
[* black] '''NOTE''': Whenicon_note] When reassembling, use tweezers to reconnect small ZIF (Zero Insertion Force) on top of screen.
[* black] '''NOTE''': Whenicon_note] When reassembling, use tweezers to reconnect small ZIF (Zero Insertion Force) on top of screen.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Geen vorige afbeelding

Toegevoegd