Ga door naar hoofdinhoud

Wijzigingen in stap #4

Bewerken voor Jacob Abrego

Bewerking goedgekeurd door Jacob Abrego

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Locate the two ribbons connected to the camera and the LCD screen. (One is red and small and the other is wide and orange)
[* [* red] Remove the top left red ribbon by gripping the connector on the camera and sliding it straight out.
[*

[*
blue] Remove the side orange ribbon by gripping the connector on the camera and sliding it straight out.
[*

[*
icon_note] Note: It may be helpful to use tweezers when removing the connectors. (Pay close attention to how the ribbons are disconnected as this will help in replacing the screen later)
[* [* red] Remove the top left red ribbon by gripping the connector on the camera and sliding it straight out.
[*

[*
blue] Remove the side orange ribbon by gripping the connector on the camera and sliding it straight out.
[*

[*
icon_note] Note: It may be helpful to use tweezers when removing the connectors. (Pay close attention to how the ribbons are disconnected as this will help in replacing the screen later)
[* icon_note] Note: When reassembling, use tweezers to reconnect the small red connector on the top left of the screen.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie