Ga door naar hoofdinhoud

Wijzigingen in stap #4

Bewerken voor Jacob Abrego

Bewerking goedgekeurd door Jacob Abrego

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Locate the two ribbons connected to the camera and the LCD screen. One(One is in red and small and the other is in orange. wide and orange)
[* red] Remove the top left red ribbon by by gripping the connector on the camera and sliding it straight out.
[* orangeblue] Remove the side orange ribbon by gripping the connector on the camera and sliding it straight out.
[*

[*
icon_note] TweezersNote: It may be necessaryhelpful to gripuse tweezers when removing the connectors. Pay(Pay close attention to how the ribbons are disconnected as this will help in replacing the screen later.later)
[* icon_note] Note: When reassembling, use tweezers to reconnect the small ZIF (Zero Insertion Force)red connector on the top left of the screen.
[* black] Locate the two ribbons connected to the camera and the LCD screen. One(One is in red and small and the other is in orange. wide and orange)
[* red] Remove the top left red ribbon by by gripping the connector on the camera and sliding it straight out.
[* orangeblue] Remove the side orange ribbon by gripping the connector on the camera and sliding it straight out.
[*

[*
icon_note] TweezersNote: It may be necessaryhelpful to gripuse tweezers when removing the connectors. Pay(Pay close attention to how the ribbons are disconnected as this will help in replacing the screen later.later)
[* icon_note] Note: When reassembling, use tweezers to reconnect the small ZIF (Zero Insertion Force)red connector on the top left of the screen.

Afbeelding 2

Oude versie

Nieuwe versie