Ga door naar hoofdinhoud

Wijzigingen aan stap #9

Bewerking door Jacob Abrego

Bewerking goedgekeurd door Jacob Abrego

Voor
Na
Ongewijzigd

Stap regels

-[* red] Pull the motherboard out by lifting it up on the left side about a 1/2 inch from the case and then slide it to the left.
- [* icon_note] Note: When reassembling, make sure the ZIF connectors are not covered by motherboard.
+[* black] Leave the camera facing backward so that the lens is facing up.
+ [* red] Pull the motherboard out by lifting it up on the left side about a 1/2 inch from the case and then slide it to the left.
+ [* icon_note] Note: When reassembling, make sure the ZIF connectors are not covered by motherboard.
[* icon_caution] Caution: When removing the motherboard, pay special attention to the battery door detection switch or you may break the plastic nib.