Ga door naar hoofdinhoud

Wijzigingen aan stap #9

Bewerking door Jacob Abrego

Bewerking goedgekeurd door Jacob Abrego

Voor
Na
Ongewijzigd

Stap regels

-[* black] Pull the motherboard out by lifting it up on the left side about a 1/2 inch from the case and then slide it to the left.
-[* black] NOTE: When reassembling, make sure ZIF connectors are not covered by motherboard
-[* icon_caution] Exercise caution when removing the motherboard. Pay special attention to the battery door detection switch or you may break the plastic nib.
+[* red] Pull the motherboard out by lifting it up on the left side about a 1/2 inch from the case and then slide it to the left.
+ [* icon_note] Note: When reassembling, make sure the ZIF connectors are not covered by motherboard.
+[* icon_caution] Caution: When removing the motherboard, pay special attention to the battery door detection switch or you may break the plastic nib.

Afbeelding 1

Oude versie

Nieuwe versie