Ga door naar hoofdinhoud

Wijzigingen aan stap #7

Bewerking door William

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Use a paperclip and bend one of the ends to form a prying tool.
-[* red] Insert the end of the paperclip into the hole located in the middle of the ribbon in order to maneuver the ribbon out of its connector.
+[* red] Insert the end of the paperclip into the one of the holes located on the ends of the ribbon in order to maneuver the ribbon out of its connector. Alternate the maneuvering between both ends.
[* icon_caution] Be careful when applying pressure to not tear the ribbon.