Ga door naar hoofdinhoud

Wijzigingen aan stap #7

Bewerking door William

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* black] Use a paperclip and bend one of the ends to form a prying tool
+[* black] Use a paperclip and bend one of the ends to form a prying tool.
[* black] Insert the end of the paperclip to maneuver the ribbon out of its connector. Be careful when applying pressure to not tear the ribbon.
[* black] Also, remove the square connector at the top of the logic board as indicated in the picture. Grab this connector with two fingers and pull upwards till it detaches.