Ga door naar hoofdinhoud

Wijzigingen aan stap #5

Bewerking door Samantha Taylor

Bewerking goedgekeurd door Samantha Taylor

Voor
Na
Ongewijzigd

Stap regels

[* yellow] Disconnect the ribbon at the bottom of the main board by flipping up the brown ZIF connector and sliding the ribbon out.
+[* black] NOTE: Tweezers are recommended to perform this step.
[* blue] If the flash is not removed, remove the right most square connector at the bottom of the camera by flipping up the connector with two fingers until it detaches.
[* violet] Locate the white rubber cover on the microphone.
- [* icon_caution] Be sure not to lose the white rubber cover for the microphone.
+ [* icon_caution] Be sure not to lose the white silver rubber cover for the microphone.