Wijzigingen aan stap #5
Bewerken voor William —
- Voor
- Na
- Ongewijzigd
Stap regels
| [* red] Remove the two 3.46 mm Philip's screws connecting the logic board to the frame of the camera. | |
| - | [* icon_note] The heads of these two screws are completely flat,while |
| + | [* icon_note] The heads of these two screws are completely flat,while most of the other screws found within this camera have a rounded head. |
| [* yellow] Disconnect the ribbon at the bottom of the main board, as indicated in the picture, by rotating the brown connector upwards and pulling the ribbon out. | |
| [* blue] If the flash is not removed, remove the right most square connector at the bottom of the camera. Grab the connector with two fingers and pull upwards till it detaches. | |
| [* icon_note] Do not lose the white rubber cover indicated by the purple square in the image. This is for the microphone. |