Ga door naar hoofdinhoud

Wijzigingen aan stap #5

Bewerking door Jacob Abrego

Bewerking goedgekeurd door Jacob Abrego

Voor
Na
Ongewijzigd

Stap regels

-[* yellow] Disconnect the ribbon at the bottom of the main board by flipping up the brown ZIF connector and sliding the ribbon out.
-[* black] NOTE: Tweezers are recommended to perform this step.
-[* blue] If the flash is not removed, remove the right most square connector at the bottom of the camera by flipping up the connector with two fingers until it detaches.
-[* violet] Locate the white rubber cover on the microphone.
- [* icon_caution] Be sure not to lose the white silver rubber cover for the microphone.
+[* black] Place the camera forward. (The lens should be facing up)
+[* red] Disconnect the ribbon at the bottom of the main board by flipping up the brown ZIF connector and sliding the ribbon out.
+ [* icon_note] Note: Tweezers are recommended to perform this step.
+[* blue] Remove the right most square connector at the bottom of the camera by flipping up the connector with two fingers until it detaches.
+[* violet] Locate and remove the white rubber cover on the microphone.
+ [* icon_note] Note: Be sure not to lose the white rubber cover for the microphone.

Afbeelding 1

Oude versie

Nieuwe versie