Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door William

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* black] Disconnect the ribbon that attaches to the logic board by rotating the connector upwards
-[* black] Then, pull the ribbon out
-[* black] Now disconnect the white connector on the top right side of the camera
+[* black] Disconnect the ribbon that attaches to the logic board by rotating the connector upwards.
+[* black] Then, pull the ribbon out.
+[* black] Now disconnect the white connector on the top right side of the camera.