Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #5

Bewerking door Jacob Abrego

Bewerking goedgekeurd door Jacob Abrego

Voor
Na
Ongewijzigd

Stap regels

[* black] Place the camera on the side opposite of the wrist strap handle.
[* black] Then begin to pry the casing apart with both hands by applying pressure to the top and bottom of the camera.
[* [* red] Remove the small metal plate underneath the plastic covering and set aside. (It should be loosely attached)
[* [* red] Remove the small metal plate underneath the plastic covering and set aside. (It should be loosely attached)
[* icon_note] Note: A rubber foam washer that separates the lens from the casing will fall off when the case is removed. Be sure to store it safely.
[* icon_note] Note: When reassembling ensure the back plate screw tabs are over the wrist strap attachment and the front plate screw tabs go under orange casing.