Ga door naar hoofdinhoud

Wijzigingen in stap #5

Bewerken voor Samantha Taylor

Bewerking goedgekeurd door Jake Devincenzi

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] •PlacePlace camera on opposite side of strap handle.”handle. (the wrist strap handle is located on the left side when facing the camera)
[* black] •PlacePlace camera on opposite side of strap handle.”handle. (the wrist strap handle is located on the left side when facing the camera)
[* black] Pry the casing apart with both hands by applying pressure to the top and the bottom of the camera.
[* red] There is a small metal plate (on opposite side of the wrist strap handle) underneath the plastic covering which is loosely attached. This piece should be removed and set aside.
[* icon_note] There is a rubber foam washer that is separates the lens from the casing. This will fall off when the case is removed and should be stored safely.
[* black] '''NOTE''': When reassembling ensure the back plate screw tabs are over the wrist strap attachment and the front plate screw tabs go under orange circuitry."circuitry.
[* icon_note] There is a rubber foam washer that is separates the lens from the casing. This will fall off when the case is removed and should be stored safely.
[* black] '''NOTE''': When reassembling ensure the back plate screw tabs are over the wrist strap attachment and the front plate screw tabs go under orange circuitry."circuitry.