Ga door naar hoofdinhoud

Wijzigingen in stap #16

Bewerken voor Terrence

Bewerking goedgekeurd door Terrence

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* blackred] Remove the final screw holding the motherboard in place. Then gently lift the motherboard up vertically. We need to remove a few cables.
[* blackblue] Remove the two marked cables. These will be tight. Do not pull by the wires. Carefully wiggle the connectors only. You ay find it easier to stand the case on edge and work the connectors loose using a small screwdriver or forceps, working through the RAM cover opening.
[* blackorange] Remove the final data cable near the front of the system board. The motherboard will be free. Lift up and towards the left to remove from the base.
[* blackred] Remove the final screw holding the motherboard in place. Then gently lift the motherboard up vertically. We need to remove a few cables.
[* blackblue] Remove the two marked cables. These will be tight. Do not pull by the wires. Carefully wiggle the connectors only. You ay find it easier to stand the case on edge and work the connectors loose using a small screwdriver or forceps, working through the RAM cover opening.
[* blackorange] Remove the final data cable near the front of the system board. The motherboard will be free. Lift up and towards the left to remove from the base.

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Oude versie

Nieuwe versie