Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door Terrence

Bewerking goedgekeurd door Terrence

Voor
Na
Ongewijzigd

Stap regels

[* red] Remove the screw above the RAM access cover that holds the CD drive in place. Then, slide the drive to the left out of the case. Be careful not to pull the front off of the tray itself.
-[* blue] Remove the 3 screws along the edge that are revealed after removing the CD drive. These screws hold the top bezel to the bottom frame.
+[* blue] Remove the three(3) screws along the edge that are revealed after removing the CD drive. These screws hold the top bezel to the bottom frame.