Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor Terrence

Bewerking goedgekeurd door Terrence

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* blackred] Remove the screw above the RAM access cover that holds the CD drive in place. Then, slide the drive to the left out of the case. Be careful not to pull the front off of the tray itself.
[* blackblue] Remove the 3 screws along the edge that are revealed byafter removing the CD drive. These screws hold the top bezel to the bottom frame.
[* blackred] Remove the screw above the RAM access cover that holds the CD drive in place. Then, slide the drive to the left out of the case. Be careful not to pull the front off of the tray itself.
[* blackblue] Remove the 3 screws along the edge that are revealed byafter removing the CD drive. These screws hold the top bezel to the bottom frame.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie