Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Connor

Bewerking goedgekeurd door David Hodson

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Loosen the two captive screws on the right hand side of the hard drive cover. The screws will remain attached to the cover.
[* black] Remove the hard drive by lifting it up vertically on the right hand side. There is usually a plastic pull tabtab to help. If not, try to gently pry it out with a flat head screwdriver.
[* black] Remove the one screw under the hard drive. This will help release the motherboard in later steps.
[* black] Remove the hard drive by lifting it up vertically on the right hand side. There is usually a plastic pull tabtab to help. If not, try to gently pry it out with a flat head screwdriver.
[* black] Remove the one screw under the hard drive. This will help release the motherboard in later steps.