Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Terrence

Bewerking goedgekeurd door Terrence

Voor
Na
Ongewijzigd

Stap regels

[* red] Loosen the two captive screws on the right hand side of the hard drive cover. The screws will remain attached to the cover.
-[* black] Remove the hard drive by lifting it up vertically on the right hand side. There is usually a plastic pull tab to help. If not, try to gently pry it out with a flat head screwdriver.
-[* black] Remove the one screw under the hard drive. This will help release the motherboard in later steps.
+[* blue] Remove the hard drive by lifting it up vertically on the right hand side. There is usually a plastic pull tab to help. If not, try to gently pry it out with a flat head screwdriver.
+[* orange] Remove the one screw under the hard drive. This will help release the motherboard in later steps.

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Oude versie

Nieuwe versie