Ga door naar hoofdinhoud

Wijzigingen aan stap #9

Bewerking door Walter Galan

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* black] There are two 3.7mm screws holding the wireless card down. Unscrew them. Once they are out, the card pops up. Pull it straight out.
+[* black] Remove the two 3.7 mm Phillips screws securing the wireless card to the motherboard.
+[* icon_note] Upon removing the Phillips screws that secures the wireless card to the motherboard, the wireless card board should pop up from its top side.
+[* black] Grasp the wireless card and pull it straight out of its socket on the motherboard.