Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerken voor Andrew Nichols

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Gently lift the plastic face (mentioned in the previous step) off of the motherboard.
[* black] Snake the black and gray wireless card cables out of the plastic face.
[* icon_caution] Take careBe careful not to not damage any of the cables that may be tangled in the motherboard.
[* icon_caution] Take careBe careful not to not damage any of the cables that may be tangled in the motherboard.
[* black] Remove the 5.8mm screws holding the motherboard down.