Ga door naar hoofdinhoud

Wijzigingen aan stap #12

Bewerking door Henk Poley

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* red] Use a pair of tweezers (or a small wrench) to remove the two hex screws secured to the logic board.
+[* red] Use a pair of tweezers (or a small wrench) to remove the two 5mm hex screws secured to the logic board.
[* icon_note] The upper case will be free to come off as a single unit after removing the two hex screws.
[* black] Lift and remove the upper case up off the lower case.