Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerking door Walter Galan

Wachtend op goedkeuring


Stap regels

+[* icon_note] Flip the laptop over.
[* black] Flip the laptop over and pop the upper bezel upwards by pulling up on the two corners closest to the keyboard.
[* black] Carefully pull the two ribbon cables attached to the upper bezel straight out of the contacts.
[* black] Lift top edge of keyboard to expose the wide ribbon cable attached to its back.
[* black] Disconnect the keyboard ribbon cable from the laptop (marked in green).