Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerking door Walter Galan

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* icon_note] Flip the laptop over.
-[* black] Flip the laptop over and pop the upper bezel upwards by pulling up on the two corners closest to the keyboard.
-[* black] Carefully pull the two ribbon cables attached to the upper bezel straight out of the contacts.
-[* black] Lift top edge of keyboard to expose the wide ribbon cable attached to its back.
-[* black] Disconnect the keyboard ribbon cable from the laptop (marked in green).
+[* icon_reminder] Flip the laptop over, keyboard side up.
+[* black] Pry the upper case upwards by pulling up on the two corners closest to the keyboard.
+[* black] Pull the two ribbon cables attached to the upper case straight out of their respective sockets.
+[* black] Lift top edge of the keyboard to expose the wide ribbon cable attached to its back side.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 3

Verwijderd