Ga door naar hoofdinhoud

Wijzigingen in stap #4

Bewerken voor Clark Novak

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_reminder] Flip the laptop over, keyboard side up.
[* black] PryCarefully lift speaker grille / button panel away from the upper case upwards by pulling up on the two corners closest to the keyboard.
[* black] Remove the latches securingcenter cable from its connector on the button panel. Then, gently release the friction locks that secure the left and right ribbon cables by pushing them away from their connectionconnectors. The center cable has no latch, gently slide itribbon cables will slip out of the connection.
[* black] Lift top edge of the keyboard to expose the wide ribbon cable attached to its back side
their connectors.
[* black] PryCarefully lift speaker grille / button panel away from the upper case upwards by pulling up on the two corners closest to the keyboard.
[* black] Remove the latches securingcenter cable from its connector on the button panel. Then, gently release the friction locks that secure the left and right ribbon cables by pushing them away from their connectionconnectors. The center cable has no latch, gently slide itribbon cables will slip out of the connection.
[* black] Lift top edge of the keyboard to expose the wide ribbon cable attached to its back side
their connectors.

Afbeelding 3

Verwijderd