Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Terrence

Bewerking goedgekeurd door Terrence

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_reminder] First, put the laptop on a flat surface and make sure the battery side is up.
[* icon_note] Then, removeicon_caution] Remove the battery to prevent any electrical damage to any of the components.
[* icon_note] Then, removeicon_caution] Remove the battery to prevent any electrical damage to any of the components.
[* black] Remove the following screws:
[* red] There are five(5) 5.8 mm Phillips screws located in the battery compartment, where the battery formerly resided.
[* orange] There are fifteen(15) 7.2 mm Phillips screws that secure the lower case to the upper case of the laptop.
[* blueicon_note] These screw locations and sizes apply for the part number RG274UA#ABA.
[* blueicon_note] These screw locations and sizes apply for the part number RG274UA#ABA.