Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Clark Novak

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_reminder] Lay the laptop on a flat surface, battery side up.
[* icon_note] Before proceeding, remove the battery to prevent any electrical damage to components.
[* black] Remove the following screws:
[* red] Five 5.8 mm Phillips screws located in the battery compartment.
[* orange] Fifteen 7.2 mm Phillips screws securing the lower case to the upper case.
[* [* black] Now is a nice moment to removeNote that on some models, screw sizes and locations are mixed, i.e.: 7.2mm screws ring the keyboardcase perimeter and are installed in the two "upper" locations in the battery compartment, while 5.8mm screws go in the three "lower" battery positions and the two inboard case screw behindlocations adjacent to the memory / wifiRAM cover.
[* [* black] Now is a nice moment to removeNote that on some models, screw sizes and locations are mixed, i.e.: 7.2mm screws ring the keyboardcase perimeter and are installed in the two "upper" locations in the battery compartment, while 5.8mm screws go in the three "lower" battery positions and the two inboard case screw behindlocations adjacent to the memory / wifiRAM cover.