Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Terrence

Bewerking goedgekeurd door Terrence

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_reminder] LayFirst, put the laptop on a flat surface,surface and make sure the battery side is up.
[* icon_note] Before proceedingThen, remove the battery to prevent any electrical damage to any of the components.
[* icon_reminder] LayFirst, put the laptop on a flat surface,surface and make sure the battery side is up.
[* icon_note] Before proceedingThen, remove the battery to prevent any electrical damage to any of the components.
[* black] Remove the following screws:
[* red] FiveThere are five(5) 5.8 mm Phillips screws located in the battery compartmentcompartment, where the battery formerly resided.
[* orange] FifteenThere are fifteen(15) 7.2 mm Phillips screws securingthat secure the lower case to the upper casecase of the laptop.
[* black] Note that on some models theblue] These screw sizes and locations are mixed, i.e.: 7.2mm screws ring the case perimeter and are installed in the two "upper" locations in the battery compartment, while 5.8mm screws go in the three "lower" battery positions and the two inboard case screw locations adjacent tosizes apply for the RAM coverpart number RG274UA#ABA.
[* red] FiveThere are five(5) 5.8 mm Phillips screws located in the battery compartmentcompartment, where the battery formerly resided.
[* orange] FifteenThere are fifteen(15) 7.2 mm Phillips screws securingthat secure the lower case to the upper casecase of the laptop.
[* black] Note that on some models theblue] These screw sizes and locations are mixed, i.e.: 7.2mm screws ring the case perimeter and are installed in the two "upper" locations in the battery compartment, while 5.8mm screws go in the three "lower" battery positions and the two inboard case screw locations adjacent tosizes apply for the RAM coverpart number RG274UA#ABA.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Verwijderd