Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Chris Blackwell

Bewerking goedgekeurd door Dayne Russell

Voor
Na
Ongewijzigd

Stap regels

-[* icon_caution] Carefully fold back the back the device.
-[* black] Slowly and carefully peel the tape back that is holding the ribbon connectors in place.
-[* black] As you pull the tape back, be sure to check to see if the wires are damaged and check to see if the points are in tact.
+[* icon_caution] Carefully flip over the back of the device.
+[* black] Carefully peel the tape back that is holding the ribbon connectors in place.
+[* black] Check to see if the wires are damaged and if the solder points are in tact.