Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Chris Blackwell

Bewerking goedgekeurd door Dayne Russell

Voor
Na
Ongewijzigd

Stap regels

-[* black] Using a separating tool, look for a corner that looks most accessible.
-[* black] Use the tool to work around the device to pry the screen from the back of the device (This tends to be a lot easier said than done)
-[* black] Utilize a card tool or a Jimmie to insert into the wedge provided by the separating tool.
+[* black] Using a separating tool, look for a seam in the plastic casing that looks most accessible.
+ [* black] To reassemble the device simply align the two casing halves and pinch to snap together or press down on the edges while the device in on a table.
+[* black] Use the prying tool to separate the front and back casing, working your way around the perimeter.
+[* black] Utilize a card tool or a pick to assist in keeping the case separated.