Ga door naar hoofdinhoud

Wijzigingen aan stap #9

Bewerking door Jonathan Fish

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Tighten/loosen the tension adjustment screws on each the caliper arm to adjust the resting distance of each brake pad so that they are equally distant from the rim. Tightening the screw will pull both calipers to that sideshift the caliper outward from the bike, loosening it will shift it inward.
[* blackred] Tighten/loosen the brake adjuster on the handle bars such that when you clamp down on the brakes, the brake lever, itlever stops before hitting the handle bar.
[* yellow] Tighten the lock nut on the brake adjuster to permanently set its position.
[* black] Tighten/loosen the tension adjustment screws on each the caliper arm to adjust the resting distance of each brake pad so that they are equally distant from the rim. Tightening the screw will pull both calipers to that sideshift the caliper outward from the bike, loosening it will shift it inward.
[* blackred] Tighten/loosen the brake adjuster on the handle bars such that when you clamp down on the brakes, the brake lever, itlever stops before hitting the handle bar.
[* yellow] Tighten the lock nut on the brake adjuster to permanently set its position.

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Oude versie

Nieuwe versie