Ga door naar hoofdinhoud

Wijzigingen in stap #6

Bewerken voor Jonathan Fish

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Fine tune the derailleur by tightening or loosening the barrel adjuster screw. Loosening it itthis screw causes the derailleur to move slightly towards a larger sprocket, while tightening it moves the derailler towards a smaller sprocket.
[* black] Shift through each gear while pedaling. The derailleur should move the chain one gear everyover each time you shift up or down on the shifterdown.
[* black] If the chain skips or makes noise when you are not shifting, use the barrel adjustment screw to positionfine tune the guide sprocket so it is right under the sprocket that corresponds to the number the shifter displaysderailleur alignment.
[* black] Fine tune the derailleur by tightening or loosening the barrel adjuster screw. Loosening it itthis screw causes the derailleur to move slightly towards a larger sprocket, while tightening it moves the derailler towards a smaller sprocket.
[* black] Shift through each gear while pedaling. The derailleur should move the chain one gear everyover each time you shift up or down on the shifterdown.
[* black] If the chain skips or makes noise when you are not shifting, use the barrel adjustment screw to positionfine tune the guide sprocket so it is right under the sprocket that corresponds to the number the shifter displaysderailleur alignment.
[* black] Repeat the previous steps until the derailleur shifts smoothly and makes a minimal amount of noise.