Ga door naar hoofdinhoud

Wijzigingen in stap #6

Bewerken voor Travis Tonder

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] fineFine tune the derailleur Usingusing the barrel adjuster screw located where the cable and cable housing meet the derailleur.
[* black] shiftShift through each gear while pedaling. theThe derailleur should move one gear every time you shift up or down on the shifter.
[* icon_note] ifIf the chain skips or makes noise when not shifting, Useuse the barrel adjustment screw to position the guide sprocket so it is right under the gear that corresponds to whatthe number the shifter displays.
[* black] fineFine tune the derailleur Usingusing the barrel adjuster screw located where the cable and cable housing meet the derailleur.
[* black] shiftShift through each gear while pedaling. theThe derailleur should move one gear every time you shift up or down on the shifter.
[* icon_note] ifIf the chain skips or makes noise when not shifting, Useuse the barrel adjustment screw to position the guide sprocket so it is right under the gear that corresponds to whatthe number the shifter displays.
[* icon_note] Loosening the barrel adjuster screw pulls in the cable, causing the derailleur to move slightly towards a larger gear. Tightening causes the derailler to move towards a smaller gear.
[* black] Repeat the previous steps until the derailleur shifts smoothly and makes a minimal amount of noise.