Ga door naar hoofdinhoud

Wijzigingen in stap #6

Bewerken voor aaron thielk

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] now you we need to fine tune the derailleur. use the barrel adjuster located where the cable and cable housing meet the derailleur.
[* black] loosening the barrel adjuster screw will effectively pull in the cable causing the derailleur to slightly move over to a larger gear. start with quarter or half turns.
[* black] using the barrel adjustment screw, position the guiedguide sprocket so it is right under the smallest gear. then shift through all the rest of the gears while pedaling. the derailur should shift one gear everytime you shift up or down on the shifter.
[* black] loosening the barrel adjuster screw will effectively pull in the cable causing the derailleur to slightly move over to a larger gear. start with quarter or half turns.
[* black] using the barrel adjustment screw, position the guiedguide sprocket so it is right under the smallest gear. then shift through all the rest of the gears while pedaling. the derailur should shift one gear everytime you shift up or down on the shifter.
[* black] repeat the previous step until the derailleur shifts smoothly and makes a minimal amount of noise.