Ga door naar hoofdinhoud

Wijzigingen in stap #4

Bewerken voor aaron thielk

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] attach the cable to the derailleur.
[*
black] Make sure the shifter is in its highest number geargear corresponding with the default position of the derailleur. This will make sure the cable is let out as far as possible corresponding with
[* black] slide
the default position ofcable through the derailleurbarrel adjuster screw until the cable housing bottoms out.
[* black] Manually pull the slack out of the cable while clamping it down with the nut that is attached to the derailleur.
[* black] attach the cable to the derailleur.
[*
black] Make sure the shifter is in its highest number geargear corresponding with the default position of the derailleur. This will make sure the cable is let out as far as possible corresponding with
[* black] slide
the default position ofcable through the derailleurbarrel adjuster screw until the cable housing bottoms out.
[* black] Manually pull the slack out of the cable while clamping it down with the nut that is attached to the derailleur.
[* black] Your derailleur is now in rough adjustment.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie

Afbeelding 3

Oude versie

Nieuwe versie